Fuel Pump, CleanCut, with 12V Solenoid
Fuel Pump, CleanCut, with 12V Solenoid
The Beckett family of CleanCut® pumps was developed to combine the benefits of solenoid valve control of fuel to the nozzle and the superior lift capabilities of traditional American pumps. The CleanCut pump has established a reputation as a rugged and reliable component for modern heating systems. Now UL Listed for fuels up to 100% biodiesel (B100) the CleanCut pump continues to set the standard of the industry.
Cleaner Operation
The solenoid valve cuts oil flow almost instantly when power is cut to the motor, eliminating coasting stops that can cause soot formation on shut-down. Pre-purge type controls work hand-in-hand with the CleanCut pump to establish airflow and bring pump pressure up to full operating levels before light-off. this ensures smoother and cleaner light-offs.
More Reliable
There are fewer moving parts, compared to conventional pumps and fewer troublesome oil fittings to cause problems. In addition, all of the moving parts in the CleanCut have been in use for years either in the US or in Europe.
Reduced Load on Motor
Configurations using an external valve deadhead pressure against the valve during start-up, increasing load on the motor. The CleanCut pump reduces demands on the motor during start-up by allowing oil to freely bypass the pump’s piston.
Higher Capacity
The unique design of the CleanCut pump delivers up to 4 gallons per hour at 100 psi. (Note that applications above 3 gph will require an additional valve due to UL requirements).
Leak-Through Protection
The CleanCut pump utilizes the same piston valve used in traditional pumps, to provide the same level of protection from leak-through in gravity feed situations.
Part Number: 9.802-562.0
Cross Reference Part Number: 7-00098, 079643, 2184402U, PF10372U, 98025620
Fuel Pump, CleanCut, with 12V Solenoid
Simple design provides faster cleaning, more reliable cut-offs, and cut-ons. Cleaner operation - less soot. More reliable - fewer moving parts. Reduced motor load in start-up. Higher capacity - 4 GPH at 100 PSI.
- PSI: 100-200
- 12V Solenoid
- Factory Set PSI: 100
- Inlet Pressure PSI: 10
- Rated Speed: 3,600 RPM
- Includes built-in solenoid with cord set.
Part Number: 9.802-562.0
Cross Reference Part Number: 7-00098, 079643, 2184402U, PF10372U, 98025620
Manufacturer | Landa |
---|---|
SKU | 7-00098 |
Part Number | 9.802-562.0 |