Fuel Pump, Suntec, 3450 / 3GPH, RH/RH

Fuel Pump, Suntec, 3450 / 3GPH, RH/RH

The fuel pump moves the fuel oil from the fuel tank to the fuel nozzle. It is driven by the burner motor. The pump uses a meshed gearset to squeeze fuel through the pump at about 100 to 200 PSI. Pump pressure is read at the gauge port and adjusted with the pressure adjusting screw.

Most fuel pump problems are due to either improper installation or clogging with debris. Assuring a clean, water-free fuel supply will do more than anything to prolong fuel pump life.

This fuel pump has been used on most of Landa’s Hot Water Pressure Washers for the past 30 Years.

IMPORTANT: The fuel pump is lubricated by fuel oil. Running the pump dry or with water in the fuel will cause pump failure.

• Model A Single Stage Pump
• Use Fuel Oil #2
• Mount in any direction.
• Shaft Rotation: RH-RH
• RPM: 3450
• Nozzle Capacity: 3 GPH
• Rated Pressure: 100 PSI
• Weight: 3.6 LBS.

Part Number: 8.700-749.0
Cross Reference Part Number(s): 079030, 7-0009, 728454, 87007490, A2VA-7116